Dometic 385310063 Floor Flange Seal for Traveler Lite 111, Traveler 511H, 510PS, 511PS, 510+, and VacuFlush Models
Dometic®Dometic 385310063 Floor Flange Seal
OEM Toilet Base Seal for Traveler Lite 111, Traveler 510H/511H, 510PS/511PS, 510+, and VacuFlush Models
Ensure a secure, leak-free toilet installation with the Dometic 385310063 Floor Flange Seal—the genuine OEM base gasket used across multiple Traveler Lite, Traveler, and VacuFlush toilets. This durable rubber seal creates the watertight and odor-tight barrier between the toilet and the floor flange, preventing leaks, rocking, and sewage odors from escaping into your RV or marine environment.
If your toilet wobbles, leaks at the base, or emits odors despite cleaning, replacing the flange gasket is the most reliable fix.
Features & Benefits
- OEM Dometic/Sealand floor flange seal for a wide range of Traveler and VacuFlush toilets
- Creates a tight, long-lasting seal between toilet base and floor flange
- Prevents leaks, odors, and moisture from escaping around the toilet base
- Helps stabilize the toilet and eliminate rocking caused by a worn compressed seal
- Made from high-quality, chemical-resistant rubber
- Recommended anytime the toilet is removed or reinstalled
Fits These Models
Compatible with:
- Traveler Lite Series- 111
- Traveler Series- 510H, 511H, 510PS, 511PS, 510+
- VacuFlush Systems - 711-M28, 2010, 2011, 506+, 509+, 706, 709, 806, 1106
-
Select VacuFlush toilets requiring this style of floor flange seal
Always confirm your model to ensure proper fit.
Common Issues Solved
Replacing the 385310063 flange seal can correct:
- Sewage odors escaping from the toilet base
- Leaks onto the floor around the toilet
- Toilet movement or rocking due to compressed or deteriorated seal
- Improper sealing after a toilet reinstall or service
- Cracked, dried, or flattened gaskets
Replaces / Also Known As
- Dometic 385310063
- Sealand 385310063
- RV toilet base gasket
- Floor flange seal for Traveler & VacuFlush
- Toilet mounting base seal
What’s Included
-
1 OEM floor flange seal (rubber gasket)
Installation Overview
- Turn off water supply and remove the toilet from the flange.
- Clean the flange surface and remove old gasket material.
- Position the new flange seal evenly over the flange opening.
- Align toilet with bolts and lower carefully onto the seal.
- Tighten bolts evenly to avoid base cracking.
- Reconnect water and test for stability and leaks.
Typical installation time: 10–20 minutes.
Frequently Asked Questions
Q: Should this seal be replaced every time the toilet is removed?
Yes. Old seals compress and won’t reseal properly once disturbed.
Q: Will this fit VacuFlush 500 or 700 series?
Some VacuFlush models use different seals—verify your model’s requirement.
Q: Is this an OEM part?
Yes—this is the genuine Dometic/Sealand replacement seal.
Q: My toilet smells even after cleaning—could this fix it?
Yes. A degraded flange seal is one of the most common causes of odor at the base.
